1. General Information Xella Baustoffe GmbH Programme holder IBU – Institut Bauen und Umwelt e.V. Panoramastr. 1 10178 Berlin Germany Declaration number EPD-XEL-20180168-IBD1-EN This declaration is based on the product category rules: Aereated Concrete, 07.2014 (PCR checked and approved by the SVR) Issue date 11/03/2019 Valid to 10/03/2024 Dipl. Ing. Hans Peters (chairman of Institut Bauen und Umwelt e.V.) Multipor mineral insulation board Owner of the declaration Xella Baustoffe GmbH Düsseldorfer Landstraße 395 D-47259 Duisburg Declared product / declared unit 1 m 3 Multipor mineral insulation board with a bulk density of 115 kg/m 3 . Scope: The life cycle assessment is based on the Multipor manufacturing plants in Stulln and Cologne-Porz, Germany, and the 2013 database. The owner of the declaration shall be liable for the underlying information and evidence; the IBU shall not be liable with respect to manufacturer information, life cycle assessment data and evidences. The EPD was created according to the specifications of EN 15804+A1 . In the following, the standard will be simplified as EN 15804 . Verification The standard EN 15804 serves as the core PCR Independent verification of the declaration and data according to ISO 14025:2010 internally x externally Dr. Alexander Röder (Managing Director Institut Bauen und Umwelt e.V.)) Patricia Wolf (Independent verifier appointed by SVR) 2. Product 2.1 Product description/Product definition The Multipor mineral insulation boards mentioned are thermal insulation boards made of calcium silicate hydrates with a very high percentage of air-filled pores. For product placement in the EU/EFTA (with the exception of Switzerland), the Regulation (EU) No. /305/2011/ (CPR) is applicable. The product requires a declaration of performance according to the /ETA- 05/0093/ of 07/06/2018, Multipor Mineral Insulation Board and the CE marking. The use of the product is governed by the respective national regulations. 2.2 Application Old and new buildings Interior and exterior insulation of outside walls Below-ceiling insulation of underground garages, cellars, passages Rooftop insulation of pitched and flat roofs, and of parking decks carrying loads As system component in the thermal insulation composite system (ETICS) Double-wall masonry Wall cavity insulation Ventilated curtain facades Floor insulation 2.3 Technical Data Structural data Name Compressive strength (mean value) Gross density Tensile strength (mean value) Thermal conductivity Water vapour diffusion resistance factor according to DIN 4108-4 Moisture content at 23 °C, 80% Bending strength (longitudinal) Shrinkage acc. to ZA-PBP-07-01, modified EN 680; adherence to a shrinkage value .of < 0.2 mm/m should be guaranteed. Value 0.35 80 - 135 0.08 0.042 - 0.05 3 6 - - Unit N/mm 2 kg/m 3 N/mm 2 W/(mK) - M.-% N/mm 2 mm/m Performance values of the product pursuant to the performance declaration with reference to its essential characteristics according to ETA-05/0093/, 07/06/2018, Multipor mineral insulation board. 2 Environmental Product Declaration Xella Baustoffe GmbH – Multipor mineral insulation board
Download PDF fil