TECHNICAL SHEET/12-01 IZOSELF REFLEX P4 - black Self adhesive waterproofing membrane with a polyester carrier and with elastomere modified bitumen Product description IZOSELF REFLEX P4 - black is a self-adhesive waterproofing membrane made from a polyester reinforcement, on both sides coated with elastomere modified bitumen. The membrane is on one side protected with easily removable siliconized foil, on the other by mineral granules. Characteristics of the product IZOSELF REFLEX P4 - black meets the demands of the standard SIST EN 13707. The high quality with elastomere modified bituminous mass gives flexibility at low temperatures and extraordinary adhesion on the surface, enabling a quick and clean installation. The polyester reinforcement gives high elasticity and resistance to static and dynamic strains. Because of its excellent flexibility at low temperatures it shows excellent characteristics at installation and deformations, and excellently bridges cracks also at low temperatures. The mechanical characteristics of the reinforcement give the product high resistance against penetration and tearing, mineral granules protect it against UV-light and ageing. Characteristic EN Method Unit Declaration EN 13707 Reinforcement Surface protection Length Width Straightness Thickness Polyester fleece mineral granules/ polymeric sheeting 1848-1 m ≥ 10 1848-1 m ≥1 1848-1 20mm/10m pass 1849-1 mm > 3,8 Water tightness 1928 kPa > 100 Flexibility at low temperature Surface Bottom Flow resistance at elevated temperature Resistance to tearing • longitudinal • transversal Shear resistance of joints • longitudinal • transversal Dimensional stability • longitudinal • transversal Water vapor properties (µ) External fire performance Reaction to fire Chemical resistance Resistance to static loading Resistance to impact Tensile properties • longitudinal • transversal Elongation • longitudinal • transversal Flexibility at low temperature after artificial aging by long term exposure to elevated temperature(12 weeks at 70 o C) Flow resistance at elevated temperature after artificial aging by long term exposure to elevated temperature(12 weeks at 70 o C) 1109 °C 1110 °C 12310-1 N 12317-1 N/50 mm 1107-1 1931 13501-5 13501-1 1847/13707 Annex C 12730/A 12691 12311-1 % µ Class Class kg mm N/50mm 12311-1 %/50mm 1296/1109 °C 1296/1110 °C < -20 ≤ -20 > 80 NPD NPD |< 0,6| |< 0,6| 20000 FROOF (t1) E pass NPD NPD ≥ 600 ≥ 550 > 35,0 > 35,0 < -10 > 70 Adhesion of granules 12039 % < 30 Content of dangerous substances Annex ZA / no Use and installation IZOSELF REFLEX P4 - black is used most of all in the system of one layer for secondary building purposes (garages, garden houses, etc.). The product is applied with cold bonding, because it has self-adhesive surface, but also need to be mechanical fastening to the surface in overlaps (distance between nails 200 mm to 300 mm). It can be installed in such a way that removes the protective film and while pressure with roller at the base. Prior to preparing the ground with coating IBITOL is recommended. If the temperature of air at installation less than 15°C you need to use hot air to increase the adhesiveness. This procedure is recommended in all cases of applications. Overlapping: machine direction with a 12 cm, cross direction with a 15cm. Thickness of wooden plates: min. 24 mm. Storage Disposal considerations of waste The rolls have to be stored in an upright position, protected against dampness and extreme temperatures. In winter it is recommended to store the rolls before installation for 24 hours at a temperature of over + 5°C. For the removal of waste of product it is necessary to follow the valid local environmental regulations. The product is in conformity with SIST EN 13707:2005+A2:2009 . Number EC certificate of control of quality: 1404 – CPD – 1059. 12 The system of quality and handling of the environment is conform with SIST EN ISO 9001 and 14001. Producer FRAGMAT TIM d.d., Spodnja Rečica 77, SI - 3270 Laško ; www.fragmat.si Laško: Tel.: +386 (0)3 734 45 00 Fax.: +386 (0)3 734 45 63 Ljubljana: Tel.: +386 (0)1 540 53 79 Fax.: +386 (0)1 524 86 94 file: Technical sheet IZOSELF REFLEX P4 - black/12-01
Download PDF fil