1) Unique identification code of the product-type: 2) Intended use/es: 3) Manufacturer: 4) System/s of AVCP: 5a) Harmonised standard: Notified body/ies: 6) Declared performance/s: DECLARATION OF PERFORMANCE N° INSEU0217.c Fibrolith-Stall-Lüftungsplatte Thermal insulation for buildings FIBROLITH Dämmstoffe GmbH - An der L83 - D-56746 Kempenich 1+3 EN 13168:2012+A1:2015 n° 0800 - MFPA Leipzig GmbH Thermal resistance Reaction to fire Essential characteristics (f) Thermal insulation for buildings Thermal conductivity Thermal resistance Thickness Reaction to fire Durability of thermal resistance against heat, weathering, ageing/degradation Thermal resistance and thermal conductivity (b) Durability characteristics (c) Test EN 12667 EN 12667 EN 823 EN 13501-1 EN 12667 --- Performance 25 ; 35 mm WW : 0,070 W/(m.K) 0,36 - 0,50 m².K/W T2 B-s1,d0 NPD NPD Durability of reaction to fire against heat,weathering, ageing/degradation Durability characteristics (a) --- NPD Compressive strength Tensile/Flexural strength Water vapour permeability Water permeability Compressive stress or compressive strength Point load Tensile strength perpendicular to faces (d) Bending strength (d) Water vapour transmission Short term water absorption EN 826 EN 12430 EN 1607 EN 12089 EN 12086 EN 1609 Durability of compressive strength against ageing/degradation Compressive creep EN 1606 Acoustic absorption index Release of dangerous substances to the indoor environment Continuous glowing combustion NPD = no performance determined Sound absorption Release of dangerous substances (e) Continuous glowing combustion (e) EN ISO 354 --- --- (a) No change in reaction to fire properties for WW products. The fire performance of WW does not deteriorate with time. The organic content, wich cannot increase with time. CS(10\Y)200 NPD NPD NPD MU3 NPD NPD NPD NPD NPD (b) Thermal conductivity of WF products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air. (c) For dimensional stability thickness only. (d) This characteristic also covers handling and installation. (e) European test methods are under development. (f) Also valid and applicable for multilayers. EN 13168:2012+A1:2015 Harmonised standard The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: at: on: Markus Maul Chief Executive Officer Kempenich 01.12.2023 INSEU0217.c /EN 1/1
Download PDF fil